Q I'm logged in the GUI but can't see the grids.
A You are trying to use the FQDN while the application is set to using the IP address or the other way around. Run
yce_setup.pl and set DNS resolved to either yes/no, depending on your environment.
Q After logging in nothing is shown at all.
A Make sure you are allowed to access the NetYCE system using either TCP port 80/443 and port 8080. See: YCE Connection matrix
Q Where do I find the latest patches and licenses?
A Patches and licenses
- verify all processes are running using 'go ps'
- if mysql is not running, execute: mysql_repair.sh as 'yce'-user
- execute 'go up' for the remaining processes
- Make sure all necessary ports are reachable, connection matrix